Aerospace Honeycomb Material High Efficiency Cutting Bandsaw Machine

Description

Aviation Titanium Composite Paper Honeycomb, FRP Composite Material, Glass Fiber Material, Multi-Angle Sawing

This bandsaw machine is specifically designed for cutting aerospace titanium composite paper honeycomb materials, which are elastic and challenging to clamp, and require multi-angle sawing. Aero-titanium composite paper honeycomb has special cutting requirements, the material is elastic and difficult to clamp, and the sawing shape has multi-angle requirements.

Therefore, this sawing machine high-speed sawing band sawing machine is a vertical multi-angle saw bow rotating, and the bed is equipped with a vacuum Strong adsorption of materials, servo-feeding band sawing machine on the bed surface, aluminum cast saw band wheel to make the saw band speed up to 1500 - 3200m/min, so that the cutting tool can perform high-speed chipping of paper honeycomb, and has dust collection equipment. Patented design vertical saw bow rotates 0 to 90 degrees, intelligent computer numerical control technology, digital angle display, precise control to meet the needs of aviation titanium, strong vacuum adsorption paper honeycomb material on the bed surface, stable feed with servo slide rail track on the bed surface, Achieve multi-angle sawing, high-efficiency, high-precision and low-cost sawing. Gaosheng sawing machine realizes high-efficiency and low-cost cutting production of aerospace titanium materials.

Standard Features

• Maximum Capacity height: 900mm
• Maximum Capacity depth: 650mm
• Deeinf Stroke: 2500mm
• Cutting Speed: 1500 - 3200M/min (adjustable frequency)
• Cutting rate 60cm²/min ~ 130cm²/min (Approx.)
• Blade Material: HSS
• Blasé Size: 3820L x 3/8" W x 0.022" T (Bay tooth).
• Saw band tensioning method: Independent hydraulic tensioning / relaxation
• Linear slide.
• Bed vacuum adsorption paper honeycomb (adhesive on the back).
• Electric control system.
• Machine operation can be divided into manual feeding.
• PLC (Mitsubishi) program parameters will be protected.
• 5.7" color LCD touch screen.
• Button switch, selector switch (France Telemecanique).
• Electromagnetic switch (France Telemecanique).
• The electric control adopts waterproof, dustproof grade IP65, the transformer is placed in the electric control box, and the ventilation fan is used to exhaust the air for cooling.
• The motor adopts F grade, and the motor is protected by a protective cover to prevent dust from entering.

Machine Features

• Using precision linear slide rail as the track.
• The structure of the bed surface is strong, and the bed surface can bear a load of more than 1. tons/m.
• Install the size block to facilitate repeated sawing of the same thickness.
• Strong infrared rays are used to indicate the cutting line, so as to facilitate the measurement and confirmation of the size.
• High-horsepower motor 5HP is used to facilitate the high-speed operation of the saw band.
• Saw band guiding, cutting load, using bearings.
• Using Japanese inverter to change the speed, the speed can be adjusted steplessly, which is convenient for work.
• The anti-vibration device of the saw band is used to eliminate the vibration caused by the high-speed operation of the saw band.
• The tension of the hydraulic saw band is convenient for the stretching and relaxation of the saw band, and it will automatically relax when the power is not working, and the saw band can extend the life of the saw band.
• Bed surface feed, using servo feed screw drive mode can achieve stepless and stable feed speed.
• A dust scraper is installed on the slide rail to protect the slide rail.
• A scale is set on the bed platform to facilitate the placement of materials, and the size can be fine-tuned by the side scale size.
• Electric wires and oil pipes are protected by protective pipes, which are tidy and beautiful.
• Adjust the height of the saw arm up and down, use the hydraulic cylinder to operate the positioning and lock it.
• The saw band speed can be displayed on the control panel, and different saw band speeds can be easily operated on the panel to facilitate the sawing work.