New SHARP SVX-500-F | Vertical Machining Centers (5-Axis or More)
Have one to sell?
ConditionNew
New
5-AXIS SIMULTANEOUS MACHINING
Minimize handling, maximize productivity
The Sharp SVX-500 vertical machining center is engineered to have unrivaled quality and outperform all other machines in its category. Sharp’s SVX-500 allows true 5-sided and 5-axis simultaneous machining. Unlike the 3-axis that requires a separate setup for cutting different sides of a part, the 5-axis machine requires the part to be set only once and rotated into a series of positions to machine each side without the need to reset the part. All major castings of the SVX-500 are analyzed using the Finite Element Method (FEM) to locate areas of stress and strain, multiple loading conditions from thermal, gravity, centrifugal and enforced displacement. Ribs locations are properly defined to maintain rigidity throughout the entire machine. The 5-axis is constructed using the box-in-box design to assure accuracy and rigidity under different cutting conditions.
- FANUC 31iB5, 10.4” LCD color screen
- 5-Axis Simultaneous
- Linear Roller Pack Way Construction
- Travel: X/Y/Z: 23.6″/ 31.9″/ 19.7″, A / C Axis: -110-20° / 360°
- Max Working Piece: 770 lbs
- Trunnion: 19.7″ Dia. Cam Roller Type, Zero Backlash
- 15K rpm, CAT 40 Big Plus, Built-in spindle, 20/25 HP
- ATC: 30 Tools( 60T optional) “Wine Rack” style, tools move in from under spindle
- Box-in-Box construction
- Position Accuracy: X/Y/Z (+/- 0.0015) (0.00006″)
- Repeatability Accuracy: X/Y/Z (+/- 0.0015) (0.00006″)
- A/C Axis Position Accuracy: A +/- 6, C +/-5 Arc Sec
- Chip conveyor situated at back of machine
- Coolant Nozzle: 2; Air Blow Nozzle: 1
- Coolant Tank Capacity: 63 Gal
WORK CAPACITY
X axis travel 23.6 in.
Y axis travel 31.9 in.
Z axis travel 19.7 in.
A axis travel (tilting) -110 to +20'
C axes travel (rotation) 360°
Spindle nose to table (A= 0°) 1.9-21.7 in.
TABLE AREA
Max Work Piece Weight 770 lbs.
T-Slot (No. x Width x degree) 0.7 in. x 45 degrees
Round Table Diameter 19.6 in.
SPINDLE
Spindle taper ISO 7/24 40 BBT Dual Contact
Spindle speed 15,000 ceramic bearing
Spindle motor: cont./30 min 20/25 HP
Spindle torque: 15 minute rating 118 Nm at 1500 rpm / 42 Nm at 5000 rpm
Transmission Built in
AUTOMATIC TOOL CHANGER
ATC type From behind and under spindle
Tool capacity 30
Max. tool diameter 2.99 in.
Without adjacent tool 4.92 in.
Max. tool length 11.8 in.
Max. tool weight 15.4 lbs.
Method of tool selection Fixed
MOTION
Rapid traverse X/Y: 2,362 ipm / Z: 1,890 ipm
Cutting feed rate 0.04-1,890 ipm
Feed motor (Fanuc) nm (inch) X/Y/C: alpha 22/4000 / Z: alpha
22B/4000 / A: alpha 40B/4000
Positioning accuracy 0.00006 in.
Repeatability accuracy 0.00006 in.
A axis position accuracy +/- arc sec 6
A axis repeatability accuracy +/- arc sec 3
C axis position accuracy accuarcy +/- arc sec 5
C axis repeatability accuracy accuarcy +/- arc sec 3
Ballscrew diameter X/Y/Z 1.77 in.
COOLANT SYSTEM
Coolant tank capacity 63 gal
Number of Flood Coolant Nozzles 4
MACHINE SIZE
Floor space (w/o chip conveyor) W: 91.3 in. x D: 169 in.
Height 127.1 in.
Weight 28,050 lbs.
Door opening 31.5 in.
POWER REQUIREMENTS
Electrical 220V / 60 Hz / 3 Phase / 45 KVA
Air 6 CFM at 88 psi
We use cookies to improve your experience. Privacy Policy.